Let’s have quick overview about the significance of zigbee simulation based on network simulator 3. Here, we are to start with the short keynote about the zigbee simulation over this article.
Zigbee Simulation Code in Ns-3
For reference, our technical professionals have highlighted the sample code based on zigbee simulation using Ns-3.
#include <ns3/core-module.h>
#include <ns3/lr-wpan-module.h>
#include <ns3/propagation-loss-model.h>
#include <ns3/propagation-delay-model.h>
Ptr<Node> n0 = CreateObject <Node> ();
Ptr<Node> n1 = CreateObject <Node> ();
Ptr<LrWpanNetDevice> dev0 = CreateObject<LrWpanNetDevice> ();
Ptr<LrWpanNetDevice> dev1 = CreateObject<LrWpanNetDevice> ();
dev0->SetAddress (Mac16Address (“00:01”));
dev1->SetAddress (Mac16Address (“00:02”));
Configure Zigbee Simulation
To configure and build the simulation based on zigbee, we have to implement the below mentioned commands in the terminal window.
cd /home/research/ns-allinone-3.26/ns-3.26
sudo ./waf configure
sudo ./waf build
Execute Zigbee Simulation Using Ns-3
Here, we have to implement the Zigbee simulation using Ns-3 through the execution of below mentioned commands in the terminal window.
cd /home/research/ns-allinone-3.26/ns-3.26
sudo ./waf –run Zigbee-main –vis
Finally, we have highlighted the simulation result that is acquired based on lr-wpan configuration.
In fact, we hope that we have provided the appropriate article about the significance of zigbee simulation. Ping us to aid more.