Non adaptive routing project examples using omnet++

On Non-Adaptive Routing Project we share with you carious ideas and project topics examples using OMNeT++ tool, here at pmnet-manual.com our developers are filled up with plenty of innovative thesis ideas that fascinates you:

1. Implementation of Static Routing:

• Objective: Execute a simple static (non-adaptive) routing protocol in a simulated network and evaluate its performance.
• Simulation Focus: Imitate a network with predefined static routes that do not vary irrespective of network conditions. Compute the performance metrics like packet delivery ratio, latency, and routing table size. Assess how well static routing works under various network loads and topologies.

2. Static vs. Dynamic Routing: A Comparative Study:

• Objective: Relate the performance of non-adaptive (static) routing with adaptive (dynamic) routing protocols like OSPF or RIP.
• Simulation Focus: Replicate a network where both static and dynamic routing protocols are executed. Compare metrics like convergence time, resilience in route differences, and efficiency in changing network conditions. Analyze the situations where static routing might be preferable because of its simplicity or lower overhead.

3. Non-Adaptive Routing in Large-Scale Networks:

• Objective: Accomplish and evaluate the performance of static routing in a large-scale network.
• Simulation Focus: Use static routing to simulate a large-scale network and evaluate its scalability. Compute the effect on routing table size, network throughput, and packet delivery ratio. Estimate the restrictions of non-adaptive routing in managing large and difficult networks.

4. Non-Adaptive Routing with Redundancy for Fault Tolerance:

• Objective: Enhance fault tolerance by executing static routing with redundant paths.
• Simulation Focus: Manage the capable link or node failures by simulating a network where static routes contain redundant paths. Compute the effect on network consistency, retrieval time, and entire performance. Compare the fault tolerance of static routing with that of adaptive routing protocols.

5. Non-Adaptive Routing in Multi-Homed Networks:

• Objective: Accomplish static routing in a multi-homed network environment with links to several ISPs.
• Simulation Focus: Use static routes to handle the traffic through numerous ISPs by imitating a multi-homed network. Analyze the performance depends on load balancing, fault tolerance, and network redundancy. Evaluate how static routing manages traffic allocation compared to dynamic routing.

6. Energy-Efficient Static Routing in Wireless Sensor Networks (WSNs):

• Objective: Prolong the network’s lifetime by developing an energy-efficient static routing protocol for WSNs.
• Simulation Focus: Recreate a WSN where static routes are enhanced for lower energy utilization. Estimate the influence on network lifetime, energy usage, and data delivery success. Compare the performance with dynamic energy-aware routing protocols based on their energy efficiency.

7. Static Routing with Quality of Service (QoS) Support:

• Objective: Prioritize specific kinds of traffic by executing static routing with QoS policies.
• Simulation Focus: Handle various kinds of traffics includes VoIP, video, and data by imitating a network in which static routes are used in conjunction with QoS policies. Measure the effect on latency, jitter, packet loss, and whole network performance for high-priority traffic.

8. Non-Adaptive Routing in Delay-Tolerant Networks (DTNs):

• Objective: Apply static routing in DTNs where network connectivity is intermittent.
• Simulation Focus: Make certain that the messages are delivered regardless of regular disconnections by mimicking a DTN environment where non-adaptive static routes are used. Compute the protocol’s performance according to their message delivery success, delay, and overhead compared to dynamic DTN routing protocols.

9. Static Routing in Hierarchical Networks:

• Objective: Explore scalability and efficiency by accomplishing static routing in a hierarchical network structure.
• Simulation Focus: Model a hierarchical network in which static routes are stated at various levels like core, allocation, and access layers. Analyze the affect on routing proficiency, network scalability, and entire performance compared to flat routing techniques.

10. Static Routing for Specialized Networks (e.g., Industrial Control Systems):

• Objective: Establish static routing in a specialized network environment involves an industrial control system, where network differences are occasional.
• Simulation Focus: Handle the interaction amongst devices by simulating an industrial control network using static routing. Evaluate the welfares of using non-adaptive routing in scenarios where steadiness and obviousness are prioritized over adjustability. Compare the performance with dynamic routing based on the consistency and control.
  

Overall, we thoroughly briefed through the description, implementation and finally evaluation process about the sample examples relevant to the Non-adaptive routing protocol implemented in OMNeT++ environment.  If needed, we will provide the detailed approach of each project for you.