How to Implement Network Structure in OMNeT++

To implement a network structure in OMNeT++  has needs to define the topology of the network that specifying the nodes like routers, switches, hosts and their connections, and potentially accumulation modules to replicate the network protocols or behaviours. Scholars can get implementation support for Network Structure in the OMNeT++ tool from omnet-manual.com. Obtain our suggestions for project topics, which we will also share with you and offer guidance for.

The given below are the procedures to execute the basic network structure in OMNeT++ with an example.

Steps to Implement Network Structure in OMNeT++

1. Install OMNeT++ and INET Framework:
   • Make sure OMNeT++ and the INET framework is installed. INET delivers the predefined network models, protocols, and components that can be used to generate numerous network structures.
2. Define the Network Topology:
   • Use the .ned file to describe the network topology. The .ned file is the primary way to define network components and how they are relevant in OMNeT++.
3. Add Network Nodes:
   • Describe various kinds of network nodes like routers, switches, and hosts. These nodes can be built-in modules from INET or custom modules to generate.
4. Connect the Nodes:
   • Stipulate the connections among the nodes. These connections signify the communication links, like wired or wireless links, among the network devices.
5. Configure the Simulation:
   • Use the .ini file to setup the network simulation that involves to setting parameters such as simulation time, packet rates, link delays, and other protocol-specific settings.
6. Run the Simulation and Analyse Results:
   • Implement the simulation and use OMNeT++’s tools to visualize and measure the network behaviour, like packet flows, delays, and throughput.

Example: Implementing a Simple Star Network Structure

1. Define Network Topology in a .ned File

// StarNetwork.ned

package networkstructure;

import inet.node.ethernet.EtherSwitch;

import inet.node.inet.StandardHost;

network StarNetwork

{

submodules:

switch: EtherSwitch {

@display(“p=200,200”);

}

host1: StandardHost {

@display(“p=100,100”);

}

host2: StandardHost {

@display(“p=300,100”);

}

host3: StandardHost {

@display(“p=100,300”);

}

host4: StandardHost {

@display(“p=300,300”);

}

connections:

host1.ethg++ <–> Eth100m <–> switch.ethg++;

host2.ethg++ <–> Eth100m <–> switch.ethg++;

host3.ethg++ <–> Eth100m <–> switch.ethg++;

host4.ethg++ <–> Eth100m <–> switch.ethg++;

}

2. Configure the Simulation in a .ini File

network = networkstructure.StarNetwork

sim-time-limit = 10s

# Application layer configuration

*.host*.numApps = 1

*.host*.app[0].typename = “UdpBasicApp”

*.host*.app[0].destAddresses = “host2”

*.host*.app[0].destPort = 5000

*.host*.app[0].messageLength = 1024B

*.host*.app[0].sendInterval = exponential(1s)

# Network layer configuration

*.host*.**.interfaceTable.externalInterfaces = “”

*.host*.**.routingTable.routes = “host2 255.255.255.255 0.0.0.0 1”

# Physical layer configuration

*.**.scalarTransmission.power = 2mW

*.**.scalarTransmission.duration = 10ms

3. Explanation of the Example

• Network Topology (StarNetwork.ned):
  • A star topology is defined with one central switch (EtherSwitch) and four hosts (StandardHost).
  • Each host is relevant to the switch with a 100Mbps Ethernet link (Eth100m).
• Simulation Configuration (omnetpp.ini):
  • The simulation is configured to run for 10 seconds.
  • Each host has one UDP application that sends packets to host2 with a message size of 1024 bytes.
  • The packets are sent with an interval defined by an exponential distribution (mean of 1 second).
  • The physical layer is configured with transmission power and duration.

4. Run the Simulation

• Compile project in OMNeT++ IDE and execute the simulation.
• Use OMNeT++’s built-in tools such as Qtenv or Tkenv to visualize the network, examine packet flows, and measure the performance metrics.

Through this page, we entirely know how to execute the network structure using the OMNeT++. If you need more information regarding the network structure we will offered it.